Fuses
The electrical system is protected by fuses located
under the control panel to the operator’s right (Fig. 38).
NOTE: It is not always possible to see if a fuse is faulty.
It is recommended that you c
heck for faulty fuses with
a continutiy tester, not visually.
The electrical system is also equipped with thermal
c
ircuit breakers. The thermal circuit breakers automat-
ically reset when allowed to cool.
1
Figure 39b
(S/N 51001 - 59999)
Figure 38
1. Fuses
Figure 39a
Figure 39c
(S/N Below 51001)
(S/N 60001 & Up)
Reelmaster
®
5100-D
Page 5 - 33
Rev. B
Repairs
To Next Page
Loading...
