Toro Reelmaster 5100-D - Page 196

Break and short circuit
Wear and
ing: Pl
i it
i
chipping
Bear ay, noise,
and rough rotation
Break and short c rcu
Insulat on
One-way mechanism
Bearing: Play, noise,
and rough rotation
Figure 45
10. Check the magnetic switch for continuity between
term
inals “S” and “M” and between terminals “S” and
body (Fig. 46). If there is continuity (or zero ohm is
indicated), replace the magnetic switch.
Figure 46
Repairs Page 5 -
38 Reelmaster
®
5100-D