26. Remove and discard the commutator seal from the
commutator cover (Fig. 44).
Figure 44
27. Remove the eleven hex socket head screws, that
hold the metering package together (Fig. 45). Use a
3/32 in. allen wrench. Inspect the screws for thread and
socket damage and replace as necessary.
Figure 45
28. Lift the commutator cover from the metering pack-
age (Fig. 46).
29. Inspect the ground surfaces of the commutator
cover. You should notice a “normal” polished pattern due
to the rotation of the commutator. If the cover has nicks,
burrs, or scoring, it must be replaced.
Figure 46
Reelmaster
®
223-D/5100-D/5300-D Page 7 - 29 Repairs
To Next Page
Loading...
