Toro Reelmaster 5100-D - Page 274

25. Put the bearing spacer onto the face of the upper
cover plate (Fig. 88).
Figure 88
26. Lightly grease the roller thrust bearing and put it on
the upper cover plate, inside the bearing spacer
(Fig. 89).
Figure 89
27. Inspect the exposed face of the drive plate making
s
ure it is clean and lint free. Apply a small amount of
clean multi-purpose grease on the drive plate (Fig. 90).
Figure 90
Repairs Page 7 - 44 Reelmaster
®
223-D/5100-D/5300-D