How to fix a Toshiba Barcode Reader that will not turn on?
If your Toshiba Barcode Reader isn't turning on, first, ensure the power cord is properly plugged in. If it is, check if the AC outlet is functioning correctly by testing it with another electrical appliance. Also, inspect the fuse or circuit breaker to see if it has blown or tripped.
What to do if my Toshiba B-EX4T2 shows a COMMS ERROR?
If your Toshiba Barcode Reader is displaying a 'COMMS ERROR', a communication error has occurred. Ensure that the interface cable is correctly connected to both the printer and the host, and verify that the host is turned on.
What to do if my Toshiba B-EX4T2 displays CUTTER ERROR?
If your Toshiba Barcode Reader shows a 'CUTTER ERROR', the media may be jammed in the cutter. Remove the jammed media and press the [RESTART] key. Also, ensure that the Cutter Cover is properly attached.
What causes a HEAD OPEN error on a Toshiba Barcode Reader?
A 'HEAD OPEN' error on your Toshiba Barcode Reader indicates that the Print Head Block is open in Online mode. Close the Print Head Block. It can also mean that feeding or printing was attempted while the Print Head Block was open. Close the Print Head Block and then press the [RESTART] key.
What to do if my Toshiba B-EX4T2 displays NO RIBBON?
If your Toshiba Barcode Reader indicates 'NO RIBBON', it means the ribbon has run out. Load a new ribbon and press the [RESTART] key.
Why won't my Toshiba Barcode Reader media feed?
If the media isn't feeding in your Toshiba Barcode Reader, ensure that the media is loaded properly. Also, check for any error messages on the display and resolve them.
What does EXCESS HEAD TEMP mean on my Toshiba B-EX4T2 Barcode Reader?
If your Toshiba Barcode Reader displays 'EXCESS HEAD TEMP', it means the Print Head has overheated. Turn off the printer and allow it to cool down for about 3 minutes.
What does REWIND FULL mean on my Toshiba Barcode Reader?
If your Toshiba Barcode Reader displays 'REWIND FULL', the Built-in Rewinder Unit is full. Remove the backing paper from the Built-In Rewinder Unit and press the [RESTART] key.
What does HEAD ERROR mean on Toshiba B-EX4T2 Barcode Reader?
If your Toshiba Barcode Reader shows a 'HEAD ERROR', it indicates a problem with the Print Head. Replace the Print Head.
What does SYNTAX ERROR mean on Toshiba B-EX4T2?
If your Toshiba Barcode Reader displays 'SYNTAX ERROR', it means that while the printer was in Download mode for upgrading the firmware, it received an improper command. Turn the printer off, and then on again.
General| Print Method | Thermal transfer |
|---|---|
| Resolution | 203 dpi |
| Print Width | 104 mm |
| Interfaces | USB |
| Optional Interfaces | Wireless LAN |
| Barcodes | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, ITF, Codabar, MSI |
| 2D Codes | Data Matrix, PDF417, QR Code, Maxi Code |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 25 - 85% RH (Non-condensing) |
Introduces the TOSHIBA B-EX4T2 series barcode printer and its owner's manual.
Highlights the printer's key features, including print head design and network capabilities.
Provides instructions and notes for unpacking the printer safely and correctly.
Lists the standard accessories included with the printer.
Details the printer's physical dimensions and views of its front and rear panels.
Lists and describes various optional modules and kits for the printer.
Covers essential precautions and steps for installing the printer in its operating environment.
Explains the procedure for connecting the printer to a power source.
Provides instructions and safety warnings for loading media and ribbons.
Details methods for connecting the printer to a host computer via various interfaces.
Describes the correct procedure for powering the printer on and off.
Guides users on configuring printer parameters for optimal operation.
Details the process of installing printer drivers on Windows operating systems.
Explains how to perform a print test to verify settings and print quality.
Covers fine adjustments for print position, tone, and ribbon motor torque.
Explains how to set and adjust media sensor thresholds for consistent print positioning.
Guides on registering media voltage levels with sensors to resolve paper jam errors.
Explains the usage of the printer's operation panel keys in Online mode.
Describes the information shown on the printer's LCD in various operational states.
Illustrates common printer operations, including error handling and job cancellation.
Details how the printer enters and exits power saving mode to conserve energy.
Provides instructions for cleaning printer components like the print head, platen, and sensors.
Lists printer error messages, their causes, and solutions.
Outlines common printer issues and their troubleshooting steps.
Provides detailed instructions for safely removing jammed media from the printer.
Details the types, sizes, and shapes of media compatible with the printer.
Describes the two types of media (label and tag) and their specifications.
Explains the detection area and position of the transmissive sensor.
Explains the detection area and alignment for the reflective sensor.
Details the relationship between print head width, paper width, and effective print areas.
Lists available RFID tag types and cautions for their use with the printer.
Specifies the shape, size, and handling requirements for approved printer ribbons.
Lists recommended media and ribbon types with print tone adjustment values.
Provides guidelines for proper care and handling of media and ribbons.
Describes the specifications and connector details for the standard USB interface.
Details the specifications, connector, and LED status for the standard LAN interface.
Outlines the specifications and connector pin assignments for the optional serial interface.
Describes the specifications and connector pin assignments for the optional parallel interface.
Specifies the standards, protocols, and settings for the optional wireless LAN interface.
Details the specifications for the optional USB host interface.
Explains the I/O signals and connectors for the optional expansion I/O interface.
Lists available RFID modules, frequency, output, and compatible tag types.
Displays examples of various fonts available for printing.
Shows visual examples of different types of bar codes that the printer can produce.
Defines key terms and concepts related to the printer, its functions, and technologies used.
To Next Page
