Toshiba E-STUDIO2508A - 4.1.8 Right top cover; 4.1.9 Right front cover; 4.1.10 Right rear cover

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 4
4.1.8 Right top cover
4.1.9 Right front cover
4.1.10 Right rear cover
(1) Remove 3 screws and take off the top right
cover [1] by lifting it up.
Fig. 4-9
(1) Open the side cover.
(2) Open the front cover.
(3) Pull out the 1st and 2nd drawers.
(4) Remove 2 screws and take off the right front
cover [1] by lifting it up.
Fig. 4-10
(1) Open the side cover.
(2) Remove 3 screws and take off the right rear
cover [1].
Fig. 4-11