Toshiba E-STUDIO2508A - 8.4.3 Moire;lack of sharpness

8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 321
8.4.3 Moire/lack of sharpness
Fig.8-5
Moire
Lack of sharpness
Defective area Step Check items Prescription
Density reproduction 1 Check the reproduction of the image
density.
Adjust the density.
Parameter adjustment
value
2 Check the image processing
parameters.
Check the adjustment value for
sharpness.
Printer section 3 Check test print image (04-114). When defects occur, perform the
corresponding troubleshooting
procedure.
Defective area Step Check items Prescription
Density reproduction 1 Check the reproduction of the image
density.
Adjust the density.
Parameter adjustment
value
2 Check the image processing
parameters.
Check the adjustment value for
sharpness.
Printer section 3 Check test print image (04-114). When defects occur, perform the
corresponding troubleshooting
procedure.
4 Check the image processing
parameters.
Check the encircled areas A and B in
the image, and change the
sharpness intensity in the sharpness
adjustment mode.
Feeding direction
AB