7
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
PREVENTIVE MAINTENANCE (PM)
7 - 45
7.7.17 Hole punch unit (MJ-6105)
*1: Perform maintenance in the timing of preventive maintenance of the equipment.
*2: Be careful not to put oil on the rollers, belts and belt pulleys when lubricating.
*3: Page-Item (P-I) is described in the column of the Parts list.
*4: This unit may require replacement once or more over the period of machine warranty because of
deterioration or damage. Replace them as needed.
Items to check*1 Cleaning
Lubrication
*2
Replacement
(x1,000)
Operation
check
Parts list
(P-I)
*3
1 Transport roller A O
2 Sensors B
3 Drive gears W1 O
4 Punched scrap container Dispose of
the
punched
paper bits.
5 Punching unit
*4
R1
1000
To Next Page
Loading...
