Toshiba E-STUDIO2508A - 4.5.5 Bypass paper sensor (S8)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 44
4.5.5 Bypass paper sensor (S8)
Notes:
When removing the paper size detection
board cover [3], be careful not to drop the
gear [4].
Fig. 4-115
(3) Disconnect 1 connector and remove the
paper size detection board [5].
Fig. 4-116
(1) Remove the bypass feed clutch.
 P. 4-151 "4.12.2 Bypass feed clutch
(CLT2)"
(2) Remove 2 screws from the automatic
duplexing unit [1].
Fig. 4-117