Toshiba E-STUDIO2508A - 7.7.11 Job separator (MJ-5014)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
7 - 32
7.7.11 Job separator (MJ-5014)
Fig. 7-24
* a. Idling roller
Apply one-rice-grain-amount of white grease (Molykote EM-30L) to each part A in the figure
below.
Fig. 7-25
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
a Idling roller A or B W1
b Other rollers A or B
c Paper guide A or B
d JSP upper stuck
sensor
B  1-51
e JSP lower stuck
sensor
B  1-12
f JSP paper jam sensor B 
c
f
e
b
a
b
d
A