e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 58
4.5.14 1st drawer paper feed unit
(4) Release the latch, and remove the 2nd
transport sensor [5].
Fig. 4-157
(1) Pull out the 1st drawer.
(2) Remove the front cover.
P. 4-1 "4.1.1 Front cover"
(3) Tilt the lock lever [1] clockwise. Pull out the
1st drawer paper feed unit [2] toward you to
remove it.
Notes:
When installing, align the arrow of the 1st
drawer paper feed unit with the guide before
inserting.
Fig. 4-158
To Next Page
Loading...
