Toshiba E-STUDIO2508A - 4.5.32 High speed transport clutch (CLT5)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 76
4.5.32 High speed transport clutch (CLT5)
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect 3 connectors [1] and release the
harness from the harness guide.
Fig. 4-208
(3) Remove 3 clips.
Fig. 4-209
(4) Remove 3 bushings and 2 screws [2], and
then take off the clutch cover [3].
Fig. 4-210