Toshiba E-STUDIO2508A - 4.11.2 Paper exit unit <35 ppm;45 ppm;50 ppm>

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 139
4.11.2 Paper exit unit <35ppm/45ppm/50ppm>
(6) Lift the rear side of the reverse unit [2] to
release the hook [3]. Slide the reverse unit
[2] to the rear side, and then remove it by
pulling toward you.
Fig. 4-372
(1) Remove the fuser unit.
 P. 4-121 "4.10.1 Fuser unit"
(2) Remove the reverse unit.
 P. 4-138 "4.11.1 Reverse unit <35ppm/
45ppm/50ppm>"
(3) Remove 3 screws and take off the paper exit
unit [1].
Fig. 4-373