5
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
5 - 65
5.19.5 Operation procedure
1. Enter into the Classic mode with [FS-08].
2. Install a USB storage device, in which setting files are stored in the root, in the MFP.
3. Key in [3673] and then press the [START] button.
4. Press [EXECUTION].
5. Setting for all codes included in the setting file are completed, the BASIC screen of the 08 mode
appears.
6. Remove the USB storage device.
To Next Page
Loading...
