Toshiba E-STUDIO2508A - 3.3.7 Thermistors and thermostats; 3.3.8 Transformer; 3.3.9 Others

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 16
3.3.7 Thermistors and thermostats
3.3.8 Transformer
3.3.9 Others
Symbol Name Function Remarks P-I
THMO1 THERMO-FSR-C
Fuser center thermostat
Preventing overheating in the fuser unit
Fig. 3-5
31-13
THMO2 THERMO-FSR-F
Fuser front thermostat
Preventing overheating in the fuser unit
Fig. 3-5
31-26
THMO3 THERMO-DRM-DH
Drum damp heater thermostat
Controlling the temperature of the drum
damp heater
Fig. 3-4
5-21
THMO4 THERMO-SCN-DH
Scanner damp heater thermostat
Controlling the temperature of the
scanner damp heater
Fig. 3-3
12-22
THMS1 THMS-C-HTR
Center thermistor
Detecting the surface temperature at
fuser roller center
(for controlling the temperature of the
center heater lamp)
Fig. 3-5
31-31
THMS2 THMS-S-HTR
Side thermistor
Detecting the surface temperature at the
rear side of the fuser roller
(for controlling the temperature of the
side heater lamp)
Fig. 3-5
31-31
THMS3 THMS-EDG-HTR
Edge thermistor
Detecting the surface temperature at the
edge of the fuser roller
(for preventing overheating)
Fig. 3-5
31-31
THMS4 THMS-DRM
Drum thermistor
Detecting the temperature at the drum
surface
Fig. 3-4
28-22
Symbol Name Function Remarks P-I
HVPS PS-HVT
High-voltage transformer
Generating high-voltage and supplying it
to the following sections
• Needle electrode
• Main charger grid
• Developer bias
• Transfer bias
Fig. 3-4
10-2
Symbol Name Function Remarks P-I
TCP TCP
Touch panel
Displaying and entering various kinds of
information
Fig. 3-3
3-1
3-29
HDD HDD
Hard disk
Storing the program data and image
data
Fig. 3-6
9-6
LVPS PS-ACC
Switching regulator
Generating DC voltage and supplying it
to each section of the equipment
Fig. 3-4
10-7