Toshiba E-STUDIO2508A - 3.3.3 Electromagnetic clutches; 3.3.4 Solenoids

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 14
3.3.3 Electromagnetic clutches
3.3.4 Solenoids
SW4 FRONT-COV-SW
Front cover switch
Detecting opening/closing of the front
cover
Fig. 3-5 1-10
SW5 ADU-COV-SW
ADU opening/closing switch
Detecting opening/closing of the
automatic duplexing unit
Fig. 3-7
Fig. 3-8
8-31
SW6 CST1-WDT-SW
1st drawer paper width detection
switch
Detecting the width of paper in the
1st drawer
Fig. 3-10 9-33
SW7 CST1-LGT-SW
1st drawer paper length detection
switch
Detecting the length of paper in the
1st drawer
Fig. 3-10
SW8 CST2-WDT-SW
2nd drawer paper width detection
switch
Detecting the width of paper in the
2nd drawer
Fig. 3-10 9-33
SW9 CST2-LGT-SW
2nd drawer paper length detection
switch
Detecting the length of paper in the
2nd drawer
Fig. 3-10
SW10 FEED-COV-SW
Feed cover opening/closing switch
Feed cover opening/closing detection Fig. 3-9
SW11 CST1-SW
1st drawer detection switch
Detecting the presence of the 1st
drawer
Fig. 3-10
SW12 CST2-SW
2nd drawer detection switch
Detecting the presence of the 2nd
drawer
Fig. 3-10
Symbol Name Function Remarks P-I
CLT1 RGST-CLT
Registration roller clutch
Driving the registration roller Fig. 3-7
Fig. 3-8
21-17
CLT2 SFB-CLT
Bypass feed clutch
Driving the bypass feed roller
Fig. 3-9
20-7
CLT3 CST1-FEED-CLT
1st drawer feed clutch
Driving the 1st drawer pickup roller
Fig. 3-10
16-5
CLT4 CST2-FEED-CLT
2nd drawer feed clutch
Driving the 2nd drawer pickup roller
Fig. 3-10
16-5
CLT5 TR-U-CLT
High speed transport clutch
Driving with high speed for the transport
roller
Fig. 3-10
7-21
CLT6 TR-M-CLT
Low speed transport clutch
Driving with low speed for the transport
roller
Fig. 3-10
7-21
Symbol Name Function Remarks P-I
SOL1 REV-SOL
Reverse gate solenoid
Changing the paper transport route at
the exit section
* 35ppm/45ppm/50ppm only
Fig. 3-8
34-28
Symbol Name Function Remarks P-I