Toshiba E-STUDIO2508A - 6.4.3 Background adjustment; 6.4.4 Sharpness adjustment

6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 25
6.4.3 Background adjustment
The density of the background can be adjusted as follows.
< 05 Adjustment Mode >
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P. 6-24 "6.4.2 Density adjustment".
6.4.4 Sharpness adjustment
If you want to make copy images look softer or sharper, perform the following adjustment.
* The values in “( )” are the adjustment codes of the Custom Mode.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
< 05 Adjustment Mode >
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P. 6-24 "6.4.2 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/
Photo
Photo Text
User
Custom
7100 7102 7101 7106
Background adjustment
The larger the value is, the darker
the background becomes.
Acceptable values:0 to 255
(Default: 128)
Original mode
Item to be adjusted Remarks
Text/
Photo
Photo Text
User
Custom
7056 7058 7057 7249 Sharpness adjustment The larger the value is, the sharper
the image becomes; while the
smaller the value is, the softer the
image becomes. The smaller the
value is, the less moire tends to
appear.
Acceptable values: 0 to 255
(Default: 128)