Toshiba E-STUDIO2508A - 4.12.8 ADU control PC board (ADU board) (ADU) <20 ppm;25 ppm; 30 ppm>; 4.12.9 ADU motor (M5) <35 ppm;45 ppm;50 ppm>

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 159
4.12.8 ADU control PC board (ADU board) (ADU) <20ppm/25ppm/
30ppm>
4.12.9 ADU motor (M5) <35ppm/45ppm/50ppm>
(1) Remove the ADU guide assembly.
 P. 4-154 "4.12.4 ADU guide assembly
<20ppm/25ppm/30ppm>"
(2) Remove 1 ground cable fixing screw from
the ADU guide assembly [1].
Fig. 4-424
(3) Disconnect 3 connectors and take off the
ADU control PC board [2].
Fig. 4-425
(1) Remove the ADU guide assembly.
 P. 4-152 "4.12.3 ADU guide assembly
<35ppm/45ppm/50ppm>"
(2) Remove 2 springs and take off the side cover
release lever [1].
Fig. 4-426