Toshiba E-STUDIO2508A - 4.10.7 Exit sensor (S5)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 126
4.10.7 Exit sensor (S5)
(1) Remove the fuser unit.
 P. 4-121 "4.10.1 Fuser unit"
(2) Tilt the pressure lever [1].
(3) Remove 2 screws and open the pressure
roller cover [2].
Fig. 4-340
(4) Release 1 latch and take off the sensor cover
[3].
Fig. 4-341
(5) Remove the actuator [4] and spring [5].
Fig. 4-342