4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 125
(4) Remove 3 screws and take off the cover [2].
Fig. 4-337
(5) Remove 5 springs [3] and take off the 5
separation finger [4].
Fig. 4-338
Notes:
Remove the separation finger in the following
procedure.
1. Lift up the separation finger and slide it
toward you.
2. Slide the separation finger toward the
front side and turn it as twist.
3. Remove the separation finger from the
groove.
Fig. 4-339
To Next Page
Loading...
