e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 38
Notes:
When removing the paper size detection
board cover [4], be careful not to drop the
gear [5].
Fig. 4-98
(7) Disconnect 1 connector from the paper size
detection board cover.
Fig. 4-99
(8) Move the projection portion [7] on the front
side and the rear side of the bypass unit [6]
to the wider part of the groove of the hinge
stoppers [8].
Fig. 4-100
To Next Page
Loading...
