2
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
2 - 3
Power requirements AC 110 V / 13.2 A, 120 V / 12 A
220-240 V / 8 A (50/60 Hz)
* The acceptable value of each voltage is ± 10%.
Power consumption 1.5 kW or less (100 V, 115 V)
1.6 kW or less (200 V series)
* The electric power is supplied to the RADF, Finisher, PFP
and LCF through the equipment.
Weight 20ppm/25ppm/30ppm: Approx. 58 kg (127.87 lb.)
35ppm/45ppm/50ppm: Approx. 61 kg (134.48 lb.)
Dimensions of the equipment W 585 x D 597 x H 787 (mm)
* When the tilt angle of the control panel is 90 degrees.
To Next Page
Loading...
