Toshiba E-STUDIO2508A - Page 301

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 181
(7) Remove 1 screw.
Fig. 4-492
(8) Remove 2 screws and take off the fixing
bracket.
Fig. 4-493
(9) Lift the bridge kit up to pull out the hook, and
pull the bridge kit toward the front side to
remove it.
Fig. 4-494