e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 8
(5) Enter the service password and press [OK].
The FS Menu appears.
* When "3" is set for FS-08-8911 (security mode), the authentication screen is always displayed.
Notes:
• The password needs to be changed to log in for the first time.
• In case both the service password and administrator password are forgotten, the passwords can
be reset in the password reset mode.
• In case both the service password and the administrator password have been forgotten, they can
be reset by means of the HA mode.
• Note that the user data are deleted at that time.
To Next Page
Loading...
