6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 81
[ 1-2 ] Mode settings / connection model settings / paper type settings
(1) Press [Button1] 11 times and then press [Button2] once.
Check the setting list and press [Button1] as many times as noted for Setting code whose
operation you want to check and then press [Button2] once.
Fig.6-86
<Setting list>
*Example of operation
If you want to select the normal paper mode, the number of Setting code is “1”.
Therefore press [Button1] 11 times and then press [Button2] once. Then press [Button1] once
and then press [Button2] once. This selects the normal paper mode.
(2) Press [Button1] and [Button2] simultaneously.
(3) Press [Button1] 11 times and then press [Button2] once.
(4) Press [Button1] 8 times and then press [Button2] once.
(5) Press [Button1] and [Button2] simultaneously.
(6) Press [Button1] 11 times and then press [Button2] once.
Check the setting list and press [Button1] as many times as noted for Setting code whose paper
type you want to select and then press [Button2] once.
<Setting list>
*Example of operation
If you want to select the plain paper, the number of Setting code is “4”.
Therefore press [Button1] 11 times and the press [Button2] once. Then press [Button1] 4
times and then press [Button2] once. This selects plain paper.
(7) Press [Button1] and [Button2] simultaneously.
Model name Setting code
Normal paper mode 1
Recycled paper mode 3
Paper type Setting code
Plain paper 4
Thick paper 1 5
Thick paper 2 6
Thick paper 3 7
LED3 LED2 LED1
Button2Button1
To Next Page
Loading...
