e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 24
(B) Pick-up failure in bypass ( )
• When the power is turned ON or the LCF drawer is inserted (when the power is turned ON or
equipment drawer / PFP drawers are inserted), LCF (PFP/equipment) performs initialization.
Detects the presence of paper
Tray-up motor ON – The tray goes up
At this time, the tray-up sensor and empty sensor are OFF.
When the tray-up sensor is not turned ON in a fixed period of time, it means that
the tray is in abnormal condition.
“Add paper” is displayed regardless of presence/absence of paper.
Cleared by turning the drawer open/close
Tray-up sensor is turned ON in a fixed period of time.
- The tray motor stops.
At this time, if the empty sensor is ON: It is judged that there is paper.
OFF: It is judged that there is no paper.
Drawer area of the LCD panel blinks (When the drawer is selected)
• When the paper in the drawer runs out during copying,
The tray-up sensor turned OFF
The tray-up motor turned ON Tray goes up
The tray-up sensor turned ON Tray-up motor stopped.
• Empty sensor turned OFF during the copying in spite of the tray-up sensor is ON
It is judged that there is no paper.
Drawer area of the LCD panel blinks (When the drawer is selected)
The copying operation is stopped.
• During bypass feeding
Bypass feed clutch ON
1st transport sensor is not turned ON in a fixed period of time
To Next Page
Loading...
