3
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
OUTLINE OF THE MACHINE
3 - 45
[ 3 ] Paper Feed System
Fig. 3-27
[1] Low speed transport clutch
[2] High speed transport clutch
The low-speed/high-speed clutches transmit the driving force from the main motor to the transport
roller. When transporting paper, they are turned ON.
The Low speed transport clutch is turned ON when the low speed transportation is performed for
printing. The High speed transport clutch is turned ON when high speed transportation is performed to
transport the paper which has passed through the paper feed sensor to the registration position. High
speed transportation is also performed when the paper is transported from the PFP to the registration
position (When the PFP is connected).
To Next Page
Loading...
