11
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
FIRMWARE UPDATING
11 - 15
* Most common USB devices comply with the specification above and can be used for
updating. However, the operation in all the Multi Functional Digital Color Systems and
Multi Functional Digital Systems is not necessarily guaranteed since the most of these
devices are developed based on use in a PC environment (Windows or Macintosh).
Therefore, check thoroughly that the device is operational in the equipment for which
the updating will be performed when purchasing it.
• The USB devices complying with USB2.0 can be used for updating.
• Do not update the firmware by any storage device other than a flash memory (such as a USB
connection type memory card reader, CD/DVD drive or hard disk), since it is never guaranteed.
• It is possible to store the model specific update program and the data file for updating directly in
the root directory when you store the updating data file for one specific model in the USB device.
However, if the model specific folder for the same model as that of the data file stored in the root
directory already exists, this will have priority.
To Next Page
Loading...
