5
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
CONTROL PANEL
5 - 17
(7) Remove 5 screws and take off the hinge
bracket.
Fig. 5-15
(8) Disconnect 5 connectors.
(9) Release the harness from 2 harness clamps.
(10) Remove 1 screw and take off the DSP board.
Fig. 5-16
(11) Remove 4 screws and take off the LCD.
Fig. 5-17
Hinge bracket
DSP board
LCD
To Next Page
Loading...
