12
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DEVELOPER UNIT
12 - 21
[B] Color developer unit
[B-1] Color developer unit
(5) Take off the mixer from the hole of front side.
Fig. 12-29
(1) Rotate the revolver to the toner cartridge
replacement position.
Notes:
Perform the operation on the control panel.
1. 1. In the [USER FUNCTION] menu:
[USER FUNCTION] → [USER] → [GEN-
RAL] → [REPLACE TONER CAR-
TRIDGE]
2. In the Test Mode (03):
03-452: Yellow toner cartridge moves to
the replacement position.
03-453: Magenta toner cartridge moves
to the replacement position.
03-454: Cyan toner cartridge moves to
the replacement position.
(2) Open the front cover and take off the color
toner cartridge while pressing the lever.
Fig. 12-30
Mixer
Mixer
To Next Page
Loading...
