e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 30
[N] IH terminal cover
Note:
Be sure to unplug before the work so as not to get an electric shock.
[O] Right rear cover
(1) Open the ADU.
(2) Open the 2nd transfer unit.
(3) Open the fuser unit cover.
(4) Remove 2 screws and take off the IH termi-
nal cover.
Fig. 2-35
(1) Take off the right upper cover
( P.2-28 "[H] Right upper cover").
(2) Take off the IH terminal cover
( P.2-30 "[N] IH terminal cover").
(3) Remove 1 screw and take off the ozone filter
cover ( P.11-23 "[Q] Ozone filter").
(4) Remove 2 screws and take off the right rear
cover.
Fig. 2-36
IH terminal cover
Right rear cover
To Next Page
Loading...
