Toshiba e-studio281c - Page 51

2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2 - 31
[P] Right rear hinge cover
[Q] Right lower cover
[R] Rear cover-1
(1) Remove 2 screws and take off the right rear
hinge cover.
Fig. 2-37
(1) Take off the right rear hinge cover
( P.2-31 "[P] Right rear hinge cover").
(2) Remove 2 screws and take off the right lower
cover.
Fig. 2-38
(1) Remove 1 screw and take off the connector
cover.
Fig. 2-39
Right rear hinge cover
Right lower cover
Connector cover