3.31 SETUP 3 Tests and Diagnostics
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 3-101
7. Others
Whether or not you need to configure the computer with these options depends primarily on
the kind of software or peripherals you use.
(a) Dynamic CPU Frequency mode
Use this option to choose a setting from the followings. This option appears only on
the Pentium model.
Dynamically Switchable
Enables Pentium-M processor featuring Intel SpeedStep
technology. (Default)
Always High Disables Pentium-M processor featuring Intel SpeedStep
technology and always runs the processor at its maximum
speed.
Always Low Disables Pentium-M processor featuring Intel SpeedStep
technology and always runs the processor at its default
speed.
(b) Execute-Disable Bit Capability
Selects the function to reports whether the CPU Execute-Disable Bit is available or
not to OS. The Execute-Disable Bit Capability is a function that strengthens the
security to protect PC from the buffer overflow attack by a computer virus and an
illegal access.
Available Enables the Execute-Disable Bit Capability.
Not Available Disables the Execute-Disable Bit Capability. (Default)
(c) Auto Power On
This option displays setting for Auto Power On.
Disabled Indicates auto power on is not set. (Default)
Enabled Indicates auto power on is set.
When “Enabled” is selected, the following sub-window appears.
Set the parameters for the Auto Power On (automatic power on) function in the
“OPTIONS” window. To set the time, use Space bar or BackSpace. Press ?
Alarm Time = 00:00:00
Alarm Date Option = Disabled
To Next Page
Loading...
Need help?
General