⎯ 26 ⎯
6 F 2 S 0 7 1 5
This screen is updated by connecting the relay again on on-line operation. (The “Plant
name/Description” are not shown on some of sample screens in this manual.)
Plant name Description
In the case of some of the relays, further two menu buttons, [MIMIC tool] and/or [PLC tool] are
added. When pressing the [MIMIC tool] or [PLC tool], the MIMIC editor or the PLC editor is
started if they are provided. For details, see the MIMIC editor or the PLC editor instruction
manual. The MIMIC editor and the PLC editor are optional software.
To Next Page
Loading...