⎯ 27 ⎯
6 F 2 S 0 7 1 5
<GR∗∗∗∗-∗∗∗D model and G1IF4>
Note 1: In the case of GR∗∗∗∗-∗∗∗D model and G1IF4, it is described as IED(=Intelligent Electrical
D
evice.)
Note 2: When IEC61850 Test mode is in test condition, it is indicated with “Test mode” on the status
screen. Test mode is refreshed when function screen is indicated by pressing each button.
The connection is maintained until you click the [Off-line] button or exit from the [Top menu]
screen.
If off-line operation is chosen on the [Start up] screen, the following buttons are indicated on the
[Top menu] screen.
Note 1: The on-line and off-line operation can be alternated on the [Top menu] screen. However,
note that all the data extracted from a relay in the on-line operation are canceled if the mode
is changed to off-line before saving the data.
Note 2: In the on-line operation, the progress bar on the screen shows that data transmission is
proceeding between the relay and the PC.
To Next Page
Loading...