Toshiba TECRA A9 Series Maintenace Manual

4.30 Hinge 4 Replacement Procedures
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-95
Installing the Hinge
To install the hinge, follow the steps below and refer to Figure 4-52 and 4-53.
1. Install the left hinge while engaging the hook and secure it with the following screw.
• M2.5×6C Tapping screw ×1
2. Install the right hinge while engaging two hooks and secure it with the following
screws.
• M2.5×6C Tapping screw ×1
• M2.5×4B FLAT HEAD screw ×1
3. Install the LCD mask and lay it down.
CAUTION: When laying the LCD mask down, be careful not to hold the top portion.
4. Secure the LCD mask with the following screws.
• M2.5×4B FLAT HEAD screw ×2
• M2.5×6C Tapping screw ×4

Toshiba TECRA A9 Series Specifications

General

Processor	Intel Core 2 Duo
Display	15.4-inch
Display Resolution	1280 x 800 pixels
RAM	Up to 4 GB
Operating System	Windows Vista
Optical Drive	DVD-RW
Wireless	802.11a/g/n
Ports	USB 2.0, VGA, Ethernet, Headphone