Toshiba Tosvert VF-A5 User Manual

Terminal block
E6580516
Charge lamp
PA teminal for DCUpower regeneration unit, etc.
1 O-M6 screws
2-M5 screws
m1[I
l~c I @
I L1 I S/L2 I T/LJt !UiTU VIT2 lyt!T3( 0
,~~-P_o_. POWER SUPPLY_] L.__ MOTOR -=..::J
200V class M5 N • m 11>-ins
1 lkW TIGHTEN TERMINALS TO M5 N • m 11>-ins
Connected to
inverter chassis
10-M8 screws (slotted hex bolt) (200V-18.5kW terminal screws)
Main circuit terminal block protective covers
~ e'\0
1
e ~
~ =~-=--=-~-QPTL-u ,-1 v-iT2 -lyt!I3(-l]!J
"CJ L.__MOTOR .....::::J (f}[
(RO and SO terminal)
When connecting a separate power
supply to the RO and SO terminals,
always remove the shorting bars,
Terminal block
Connected to the main circuit
terminals. Do not connect
external wiring to the lower
terminals.
Terminal cover
lcAUTIONI
RO SO
4-M4XBL screws
With terminal cover
Recommended
tightening torque:
1.2N·m (11 lbs-in)
CONTROL POWER SUPPLY
200V CLASS
or the inverter may be damaged. Note} 400V systems are indicated as "400V CLASS'"
Fig 6.2.5 Main circuit terminal block (11 kW to 18.SkW units)
- 26 -

Toshiba Tosvert VF-A5 Specifications

General

Brand	Toshiba
Model	Tosvert VF-A5
Category	Inverter
Language	English