Configuring Layer 2 Multicast Viewing Multicast Snooping Information
User Guide 269
Error Packets Displays the number of error packets received by the port.
6.2 Using the CLI
6.2.1 Viewing IPv4 Multicast Snooping Information
show ip igmp snooping groups [ vlan
vlan-id
] [count | dynamic | dynamic count | static | static count ]
Displays information of specific multicast group in all VLANs or in the specific VLAN.
count: Displays the number of multicast groups.
dynamic: Displays information of all dynamic multicast groups.
dynamic count: Displays the number of dynamic multicast groups.
static: Displays information of all static multicast groups.
static count: Displays the number of static multicast groups.
show ip igmp snooping interface [ fastEthernet [
port-list
]
| gigabitEthernet [
port-list
] | ten-
gigabitEthernet [
port-list
] ] packet-stat
Displays the packet statistics on specified ports or all ports.
clear ip igmp snooping statistics
Clear all statistics of all IGMP packets.
6.2.2 Viewing IPv6 Multicast Snooping Configurations
show ipv6 mld snooping groups [vlan
vlan-id
] [count | dynamic | dynamic count | static | static count ]
Displays information of specific multicast group in all VLANs or in the specific VLAN.
count displays the number of multicast groups.
dynamic displays information of all dynamic multicast groups.
dynamic count displays the number of dynamic multicast groups.
static displays information of all static multicast groups.
static count displays the number of static multicast groups.
show ipv6 mld snooping interface [ fastEthernet [
port-
li
st
]
| gigabitEthernet [
port-
li
st
] | ten-
gigabitEthernet [
port-
li
st
] ] packet-stat
Displays the packet statistics on specified ports or all ports.
clear ipv6 mld snooping statistics
Clear all statistics of all MLD packets.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General