TP-Link JetStream T1500G-8T User Manual

User Guide 408
Configuring DHCP Service DHCP L2 Relay Configuration
3
DHCP L2 Relay Configuration
To complete DHCP L2 Relay configuration, follow these steps:
1) Enable DHCP L2 Relay.
2) Configure Option 82 for ports.
3.1 Using the GUI
3.1.1 Enabling DHCP L2 Relay
Choose the menu L3 FEATURES > DHCP Service > DHCP L2 Relay > Global Config to
load the following page.
Figure 3-1 Enable DHCP L2 Relay
Follow these steps to enable DHCP L2 Relay globally for the specified VLAN:
1) In the Global Config section, enable DHCP L2 Relay globally. Click Apply.
DHCP L2 Relay Enable DHCP Relay globally.
2) In the VLAN Config section, enable DHCP L2 Relay for the specified VLAN. Click Apply.
VLAN Displays the VLAN ID.
Status Enable DHCP L2 Relay for the specified VLAN.
Downloaded from ManualsNet.com search engine

TP-Link JetStream T1500G-8T Specifications

General

Brand	TP-Link
Model	JetStream T1500G-8T
Category	Switch
Language	English