User Guide 282
Configuring Layer 2 Multicast Configuration Examples
MVR Multicast Vlan :40
MVR Max Multicast Groups :511
MVR Current Multicast Groups :1
MVR Global Query Response Time :5 (tenths of sec)
MVR Mode Type :Dynamic
Show the membership of MVR groups:
Switch(config)#show mvr members
MVR Group IP Status Members
----------------- ------------ ------------------
225.1.1.1 active Gi1/0/4
7.3 Example for Configuring Unknown Multicast and Fast Leave
7.3.1 Network Requirement
A user experiences lag when he is changing channel on his IPTV. He wants solutions to
this problem. As shown in the following network topology, port 1/0/4 on the switch is
connected to the upper layer network, and port 1/0/2 is connected to Host B.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
