User Guide 658
Configuring IPv4 IMPB Configuration Examples
5.2.3 Using the GUI
1) Choose the menu SECURITY > IPv4 IMPB > IP-MAC Binding > Manual Binding and
click to load the following page. Enter the host name, IP address, MAC address
and VLAN ID of the legal host, select the protect type as , and select port 1/0/1 on the
panel. Click Apply.
Figure 5-7 Manual Binding
2) Choose the menu SECURITY > IPv4 IMPB > IPv4 Source Guard to load the following
page. Enable IPv4 Source Guard Logging to make the switch generate logs when
receiving illegal packets, and click Apply. Select ports 1/0/1-3, configure the Security
Type as SIP+MAC, and click Apply.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
