User Guide 641
Configuring IPv4 IMPB IP-MAC Binding Configuration
VLAN ID: 5
Switch(config-if)#show ip dhcp snooping interface gigabitEthernet 1/0/1
Interface max-entries LAG
--------- ----------- ---
Gi1/0/1 100 N/A
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.3 Viewing Binding Entries
On privileged EXEC mode or any other configuration mode, you can use the following
command to view binding entries:
show ip source binding
View the information of binding entries, including the host name, IP address, MAC address, VLAN ID, port
number and protect type.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General