User Guide 534
Configuring AAA AAA Configuration
Pri1- Pri4 Specify the authentication methods in order. The method with priority 1
authenticates a user first, the method with priority 2 is tried if the previous
method does not respond, and so on.
local: Use the local database in the switch for authentication.
none: No authentication is used.
radius: Use the remote RADIUS server/server groups for authentication.
tacacs: Use the remote TACACS+ server/server groups for authentication.
Other user-defined server groups: Use the user-defined server groups for
authentication.
2) Click Create to add the new method.
2.1.4 Configuring the AAA Application List
Choose the menu SECURITY > AAA > Global Config to load the following page.
Figure 2-7 Configure Application List
Follow these steps to configure the AAA application list.
1) In the AAA Application List section, select an access application and configure the
Login list and Enable list.
Module Displays the configurable applications on the switch: telnet, ssh and http.
Login List Select a previously configured Login method list. This method list will
authenticate the users trying to log in to the switch.
Enable List Select a previously configured Enable method list. This method list will
authenticate the users trying to get administrative privileges.
2) Click Apply.
2.1.5 Configuring Login Account and Enable Password
The login account and Enable password can be configured locally on the switch or centrally
on the RADIUS/TACACS+ server(s).
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General