Configuration Example
User Guide 801
Figure 6-7 Enabling Storm Control Trap
7) Click to save the settings.
■ Configuring RMON
1) Choose MAINTENANCE > SNMP > RMON > Statistics and click
to load the
following page. Create Statistics entries 1 and 2, and bind them to ports 1/0/1 and
1/0/2, respectively. Set the owner of the entries as monitor and the status as Valid.
Figure 6-8 Configuring Statistics Entry 1
Figure 6-9 Configuring Statistics Entry 2
2) Choose the menu MAINTENANCE > SNMP > RMON > History to load the following
page. Configure entries 1 and 2. Bind entries 1 and 2 to ports 1/0/1 and 1/0/2,
respectively. Set the Interval as 100 seconds, Maximum Buckets as 50, the owner of the
entries as monitor, and the status as enabled.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
