TP-Link TL-SG3109 - Show Ip Interface

show ip interface
The show ip interface Privileged EXEC mode command displays the usability status of configured IP interfaces.
Syntax
show ip interface [ethernet interface-number | vlan vlan-id | port-channel port-channel number.]
Parameters
•
interface-number — Valid Ethernet port.
• vlan-id — Valid VLAN number.
• port-channel number. — Valid Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example the displays the configured IP interfaces and their types.
Console# show ip interface
Gateway IP Address Type Activity status
------------------ ------ ---------------
10.7.1.1 Static Active
IP address Interface Type
------------- --------- -------
10.7.1.192/24 VLAN 1 Static
10.7.2.192/24 VLAN 2 DHCP
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 117