TP-Link TL-SG3109 - Revision (Mst)

revision (mst)
The revision MST configuration command defines the configuration revision number. To return to the default con-
figuration, use the no form of this command.
Syntax
revision value
no revision
Parameters
•
value—Configuration revision number (Range: 0-65535).
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 242