TP-Link TL-SG3210 - Show System-Info; Show Running-Config; Show Cable-Diagnostics Interface

TL-SG3424# show system-time ntp
show system-info
Description
The show system-info command is used to display system description, system
name, device location, system contact, hardware version, firmware version,
system time, run time and so on.
Syntax
show system-info
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system information:
TL-SG3424# show system-info
show running-config
Description
The show running-config command is used to display the current operating
configuration of the system or of a specified port.
Syntax
show running-config [ interface gigabitEthernet port ]
Parameter
port —— The Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system current operating configuration:
TL-SG3424#show running-config
show cable-diagnostics interface
Description
129