TL-SG3424(config-line)# login
Configure the login of virtual terminal connection 0-5 as login mode:
TL-SG3424(config)# line vty 0 5
TL-SG3424(config-line)# login
login local
Description
The login local command is used to configure the login of a switch with the user
name and password.
Syntax
login local
Command Mode
Line Configuration Mode
Example
Configure the login of virtual terminal connection 0-5 as login local mode:
TL-SG3424(config)# line vty 0 5
TL-SG3424(config-line)# login local
Configure the login of Console port connection 0 as login local mode:
TL-SG3424(config)# line console 0
TL-SG3424(config-line)# login local
telnet
Description
The telnet enable command is used to enable the Telnet function. To disable the
Telnet function, please use the telnet disable command. This function is
enabled by default.
Syntax
telnet enable
telnet disable
58
To Next Page
Loading...
