Trane TR200 Series User Manual

0-38 Display Text 2
Range: Function:
0 N/A* [0 - 0 N/A] In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 2 in par.0-20
Display Line 1.1 Small, par.
0-21
Display Line 1.2 Small, par.0-22 Display Line 1.3 Small, par.
0-23
Display Line 2 Large or par.0-24 Display Line 3 Large. Use the
▲
or
▼
buttons on the keypad to change a character. Use the
◀
and
▶
buttons
to move the cursor. When a character is highlighted by the cursor, this
character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
▲
or
▼
.
0-39 Display Text 3
Range: Function:
0 N/A* [0 - 0 N/A] In this parameter it is possible to write an individual text string for display
in the keypad or to be read via serial communication. If to be displayed
permanently select Display Text 3 in par.0-20
Display Line 1.1 Small,par.
0-21
Display Line 1.2 Small, par.0-22 Display Line 1.3 Small, par.
0-23
Display Line 2 Large or par.0-24 Display Line 3 Large. Use the
▲
or
▼
buttons on the keypad to change a character. Use the
◀
and
▶
buttons
to move the cursor. When a character is highlighted by the cursor, this
character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
▲
or
▼
.
Keypad, 0-4*
Enable, disable and password protect individual keys on the keypad.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Hand on] Key enabled
[2] Password Avoid unauthorized start in Hand mode. If par.0-40
[Hand on] Key on
LCPis included in the My Personal Menu, then define the password in
par.0-65
Personal Menu Password. Otherwise define the password in
par.0-60
Main Menu Password.
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Off] Key is enabled
[2] Password Avoid unauthorized stop. If par.0-41
[Off] Key on LCP is included in the
My Personal Menu, then define the password in par.0-65
Personal Menu
Password. Otherwise define the password in par.0-60 Main Menu Pass-
word.
Parameter Description
52 TR200 Programming Guide

Trane TR200 Series Specifications

General

Input Voltage	24 VAC
Frequency Range	50/60 Hz
Communication Protocols	BACnet MS/TP, Modbus RTU
Controller Type	Programmable
Power Range	20 VA
Control Method	PID Control
Enclosure Rating	IP20
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity Range	5% to 95% non-condensing
Memory	Non-volatile