Trane Tracer Summit Hardware And Software Installation

152 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

BMTX-SVN01C-EN

Hardware and Software

Installation

TRACER SUMMIT™

Version 17

Table of Contents

Other manuals for Trane Tracer Summit

Hardware And Software Installation Guide272 pages

Installation Instructions2 pages

Questions and Answers:

A
Amy ClarkJul 27, 2025
What causes a Trane Tracer Summit BCU panel mismatch error, and how can I resolve it?
- M
  Michael AtkinsJul 28, 2025
  A Trane Control Systems BCU panel mismatch error can occur due to active panel checking. To resolve this, verify that the device ID of the panel you are attempting to download matches the Site Configuration address for that panel. Also, check if the panel type in the Site Configuration editor matches the panel that appears in the Panel Mismatch error message. If the Site Configuration setup for the panel matches the BCU hardware, but you still get a panel mismatch error, properly seat or change the failed hardware.
D
Diane CarterAug 3, 2025
What to do if my Trane Control Systems BCU locks up?
- A
  April TaylorAug 4, 2025
  If your Trane Control Systems BCU locks up, it could be due to several reasons: * A building power disturbance: Cycling the power on the BCU should clear this up. For repeated issues, consider installing an external device to protect against AC power transients. * A power disturbance through the modem line: Cycling the BCU power should resolve this. * Strong EMI/RFI interference: Avoid using cell phones and walkie-talkies within 6 ft of the BCU. * Too many UCM and program objects: Estimate BCU memory usage with the BCU sizing spreadsheet before connecting UCMs and programming the BCU. * BCUs programmed to route alarms/events to remote Tracer Summit PC Workstations: Ensure remote workstations are connected periodically to harvest the alarms.
J
Justin DoyleAug 12, 2025
How to fix a Trane Tracer Summit BCU that does not respond?
- E
  Erin MarksAug 12, 2025
  If your Trane Control Systems BCU is not responding, check the following: * Verify the BCU has the correct AC supply voltage. * Check for the proper device address on the BCU logic board and the ARCNET card (if applicable). * Ensure the BCU power switch is turned on. * Verify the BCU LEDs sequence properly on power up and that the ARCNET or Ethernet card LEDs show normal activity. * Check the ARCNET or Ethernet cable connections. * Perform a Clear Code, Database, RAM, and Reset using the BCU DIP switches.
G
gina07Aug 18, 2025
Why is my Trane Tracer Summit Control Systems BCU not communicating via modem?
- T
  Thomas BrooksAug 19, 2025
  If your Trane Control Systems BCU is not communicating via modem, here are some things to check: * Verify that the BCU has a modem object. * Check for a dial tone and verify that the phone can make and receive calls. * Consider using an in-line transient protection device on the phone line. * If the phone line goes through a local phone system, ensure additional wait times and access numbers are programmed into the phone numbers. * Verify that the correct phone number is being used when attempting to dial into a BCU.

Trane Tracer Summit Specifications

General

Manufacturer	Trane
Type	Building Automation System
Communication Protocol	BACnet, Modbus
User Interface	Graphical User Interface (GUI)
Scalability	Scalable from small to large buildings
Energy Management	Advanced energy management strategies, scheduling, and reporting
Alarm Management	Comprehensive alarm handling and notifications
Reporting	Customizable reports and analytics
Remote Access	Yes, via web-based interface

Related product manuals

Preview: Trane Tracer MP581/AH541

Trane Tracer MP581/AH541

Tracer Concierge BMTC015ABC012000

TRACER SUMMIT BMTX-SVU01B-EN

Preview: Trane XL824

Preview: Trane LCD Control Series

Trane LCD Control Series

Trane ACYSTAT110AA

Trane ACYSTAT120AA

Trane ACYSTAT220AA

Preview: Trane Tracer XM30

Trane Tracer XM30

Trane Tracer XM90

Preview: Trane Tracer MP503

Trane Tracer MP503

Preview: Trane TR200 MCB 105

Trane TR200 MCB 105